Expamet 95S EM Lathing 0.460mm St/St 2500x700mm

Elevate your construction work with our EM Lathing 0.460mm Stainless Steel Sheets. These 2500x700mm sheets provide excellent corrosion resistance and structural support for your projects.

Installation Requirements:

  • A 5-6mm gap must be provided between the lath and substrate
  • Overlap sheets 50mm along short edge, and 25mm along long edge
  • Fixings to perimeter at 150mm intervals, central fixings at max 350mm in a staggered formation
  • Sheets should be staggered in a stretcher (brick bond) arrangement
  • If overlaps are unsupported, they must be wire-tied at 150mm centres

Features & Benefits:

  • Acts as a carrier for plaster where no key or backing is present
  • Can be used over chases/columns to prevent cracking
  • Can be moulded into curves/domes
  • Can easily be cut to size using tin-snips or aviation cutters
  • Stainless Steel for external use