Expamet L80 Splice Plates L80-560mm (8x4)

Elevate your structural connections with our Splice Plates L80-560mm. This set includes 8 pairs of plates, each measuring 560mm, ensuring reliable reinforcement and stability in your construction endeavors.

Installation Requirements:

• Cavity size 126-150mm
• Tie must be bedded and covered in fresh mortar before laying course above
• Minimum design embedment 62.5mm
• Tie spacings should be in accordance with PD6697
• Tie should be located centrally between leaves

Features & Benefits:

• High tensile corrosion resistant stainless steel
• Safety End prevents injury

Options:

• For partial fill rigid insulation, use retaining disc ref: SSCD

More Information
Weight	16.760000
Availability	Geographical restrictions and/or extended lead times may apply for this product. If you can confirm the delivery postcode with us we’ll be happy to advise at the time of order..
Manufacturer	Expamet
Material Gauge	1.2mm
Width/Wing Length	18mm
Length/Projection	560mm
Length/Height	80mm
Expamet - Product Range	Builders Metalwork
Plaster/Render/Joist Depth	175-200mm Joist
Expamet - Product Type	Splice Plates
Material	Galvanized Mild Steel DX51D+Z275 to EN10346:2015
Expamet - Product Sub Range	Timber Connectors
Coating/Finish/Colour	275g/m² Zinc Coating
Fire Rating	Euroclass A1
Declared Loadbearing Capacity	Moment Capacity 1.5kNm (SLS)
Sap Id	exp_L80/4

No reviews yet on this product

Delivery Information

Delivery availability

We deliver to most mainland UK addresses. Some postcode areas are excluded – please see the full list below.

Delivery charges

Delivery costs vary depending on your location, the products ordered, and the delivery method selected. All delivery charges are calculated clearly at checkout.

Fuel Surcharge

Information on our added Fuel Surcharge can be found at https://condell-ltd.com/fuel-surcharge-notification

Delivery dates

You can request a preferred delivery date at checkout. While we aim to meet this wherever possible, availability may depend on stock levels and third-party delivery schedules. If your chosen date is unavailable, a member of our team will contact you to arrange an alternative.

Delivery method

All deliveries are made kerbside as standard. For health and safety reasons, drivers are unable to carry materials beyond the kerb. If you have specific access requirements, please contact us before placing your order.

Delivery exclusions

We currently do not deliver to the following postcode areas:

AB16, AB21–22, AB30–AB38, AB41–AB56, BT1–BT94, CA2, CA15, CA28, DD1, DD8, DD9, DG1, DG2, DG10–DG14, DG16, FK18–FK20, GY1–GY9, HS1–HS9, IM1–IM9, IV1–IV5, IV7, IV12–IV13, IV21–IV28, IV30–IV36, IV40–IV56, JE1–JE4, KA1, KA4–KA6, KA14–KA15, KA18–KA21, KA27–KA30, KW1–KW3, KW6–KW17, KY6–KY10, KY13–KY16, LL49, LL58–LL62, LL64–LL78, PA17–PA78, PH11, PH19–PH26, PH30–PH33, PH35–PH38, PH40–PH44, PH49–PH50, PO30–PO41, SA68, SA71, ZE1–ZE3

Important delivery terms

Shortages must be reported within 48 hours and noted on delivery paperwork
All deliveries must be signed for; redelivery charges may apply
Deferred deliveries may incur storage charges
Collected orders are not subject to delivery charges
Returns are subject to a 25% restocking fee (delivery charges excluded)
Made-to-measure items are non-refundable
Reasonable access to the delivery point must be available; additional charges may apply