Skip to the beginning of the images gallery

QIC E25 Drylining Trim RAL 9010 (White) 3000mm

SKU

QIC_E25

£6.44 £5.37

QIC E25 Drylining Trim RAL 9010 (White) 3000mm is available to buy in increments of 10

Product Information

QIC E25 drylining trim, 25 x 21mm (1" x 0.83"), 3000mm (9ft 10in) length in white RAL 9010 finish.
Designed for creating crisp, straight edges on plasterboard runs in walls and ceilings.
Manufactured from architectural grade aluminium alloy for durability and reliability on site.
Pre-punched fixing slots for quick, secure installation using drywall screws.
All trims supplied in white polyester powder coat; alternative finishes available on request. Non-standard sizes and factory curving available to special order.

Details

The QIC E25 Drylining Trim in RAL 9010 white is a specialist aluminium profile designed for trade professionals tackling plasterboard installations. Perfect for builders, site managers, and contractors, this trim provides sharp, neat edges on both walls and ceilings, ensuring a clean finish for dry lining systems. Supplied as standard in white powder-coated finish, it comes in 3000mm lengths to suit a range of projects. Please note, alternative finishes and bespoke sizes are available on request.

Application

This trim is ideal for forming vertical or horizontal edges at the ends of plasterboard runs or where recessed or raised features are required. It is compatible with drywall frameworks made from metal studs, timber, or other suitable materials, and is used extensively in partition walls and ceiling installations. The E25 trim enhances the aesthetic quality of dry lining jobs but is not intended to provide structural support; adequate framing should always back the trim.

Dimension

Profile size: 25 x 21mm (approx. 1" x 0.83")
Length: 3000mm (9ft 10in)

Material

Architectural grade aluminium alloy to BS 1474
White polyester powder coating, RAL 9010, 20% gloss finish

Type

Drylining trim – metal profile for plasterboard edge finishing

All trims are supplied as standard in white RAL 9010 powder coat, with non-standard lengths, factory curving, and alternative finishes available on special order. Please contact us for bespoke requirements. The trims are pre-punched for efficient fixing using drywall screws and must always be installed backed by plasterboard rather than directly fixed to framing. Images are for illustration purposes only.

More Information

More Information
Manufacturer	QIC Trims
Sap Id	QIC_E25
Availability	Geographical restrictions and/or extended lead times may apply for this product. If you can confirm the delivery postcode with us we’ll be happy to advise at the time of order..

Customer Reviews

No reviews yet on this product

Delivery Information

Delivery availability

We deliver to most mainland UK addresses. Some postcode areas are excluded – please see the full list below.

Delivery charges

Delivery costs vary depending on your location, the products ordered, and the delivery method selected. All delivery charges are calculated clearly at checkout.

Fuel Surcharge

Information on our added Fuel Surcharge can be found at https://condell-ltd.com/fuel-surcharge-notification

Delivery dates

You can request a preferred delivery date at checkout. While we aim to meet this wherever possible, availability may depend on stock levels and third-party delivery schedules. If your chosen date is unavailable, a member of our team will contact you to arrange an alternative.

Delivery method

All deliveries are made kerbside as standard. For health and safety reasons, drivers are unable to carry materials beyond the kerb. If you have specific access requirements, please contact us before placing your order.

Delivery exclusions

We currently do not deliver to the following postcode areas:

AB16, AB21–22, AB30–AB38, AB41–AB56, BT1–BT94, CA2, CA15, CA28, DD1, DD8, DD9, DG1, DG2, DG10–DG14, DG16, FK18–FK20, GY1–GY9, HS1–HS9, IM1–IM9, IV1–IV5, IV7, IV12–IV13, IV21–IV28, IV30–IV36, IV40–IV56, JE1–JE4, KA1, KA4–KA6, KA14–KA15, KA18–KA21, KA27–KA30, KW1–KW3, KW6–KW17, KY6–KY10, KY13–KY16, LL49, LL58–LL62, LL64–LL78, PA17–PA78, PH11, PH19–PH26, PH30–PH33, PH35–PH38, PH40–PH44, PH49–PH50, PO30–PO41, SA68, SA71, ZE1–ZE3

Important delivery terms

Shortages must be reported within 48 hours and noted on delivery paperwork
All deliveries must be signed for; redelivery charges may apply
Deferred deliveries may incur storage charges
Collected orders are not subject to delivery charges
Returns are subject to a 25% restocking fee (delivery charges excluded)
Made-to-measure items are non-refundable
Reasonable access to the delivery point must be available; additional charges may apply