Skip to the beginning of the images gallery

Expamet SPHS12575 Sph STD Joist Hanger 125x75mm (Box of 30)

SKU

exp_SPHS12575/30

£98.56 £82.13

Product Information

Expamet SPHS12575 joist hanger measuring 125mm (4.92") x 75mm (2.95")
Box of 30 hangers, suited for bulk purchase by builders and contractors
Single-piece, non-welded design with 600g/m² galvanised coating for corrosion resistance
Engineered for secure joist support in timber framing and structural applications
Installation requires joists cut square with specific nailing; see full fitting instructions

Details

The Expamet SPHS12575 joist hanger is a robust timber connector designed for professionals requiring reliable, consistent support for joists. Supplied in a box of 30, it suits builders, carpenters, and contractors working on structural frameworks where secure timber connections are critical. Please note, these hangers must be installed according to specified guidelines to ensure optimal performance.

Application

Specifically crafted for use in timber framing, the SPHS12575 joist hanger provides a secure fixing for joists in floors, ceilings, and decking structures. Its galvanised finish protects against corrosion, making it suitable for internal and covered external applications. Ideal for projects demanding precise joist alignment and load transfer, this hanger supports stable, long-lasting construction.

Dimension

125mm (4.92") x 75mm (2.95")

Material

Galvanised steel with 600g/m² coating for durability and corrosion resistance

Type

Timber connector – joist hanger

Installation notes: The hanger must be fitted tight against the wall with joists cut square and no more than 6mm gap at the rear. A minimum of 675mm of set masonry must be in place before applying loads. Joists should be nailed through the side gusset using 3.75x30mm square twisted nails. The underside of joists must be notched to provide a level surface for plasterboarding.

More Information

More Information
Weight	13.600000
Availability	3 to 4 working days
Manufacturer	Expamet
MPN	SPHS12575
Material Gauge	2.0mm
Notified Body	Lucideon Ltd (NB 1289)
Length/Projection	75mm Shoe, 75mm Flange
Length/Height	125mm
Expamet - Product Range	Builders Metalwork
Plaster/Render/Joist Depth	75mm Joist Width
Expamet - Product Type	Masonry/Single Piece Hanger
Material	Galvanized Mild Steel DX51D+Z600 to EN10346:2015
European Standard	BS EN845-1:2013+A1:2016
Expamet - Product Sub Range	Joist Hangers
Test Standard	BS EN 846-8:2000
Coating/Finish/Colour	600g/m² Zinc Coating
Fire Rating	Euroclass A1
Declared Loadbearing Capacity	5kN SWL (SLS)
Sap Id	exp_SPHS12575/30

Customer Reviews

No reviews yet on this product

Delivery Information

Delivery availability

We deliver to most mainland UK addresses. Some postcode areas are excluded – please see the full list below.

Delivery charges

Delivery costs vary depending on your location, the products ordered, and the delivery method selected. All delivery charges are calculated clearly at checkout.

Fuel Surcharge

Information on our added Fuel Surcharge can be found at https://condell-ltd.com/fuel-surcharge-notification

Delivery dates

You can request a preferred delivery date at checkout. While we aim to meet this wherever possible, availability may depend on stock levels and third-party delivery schedules. If your chosen date is unavailable, a member of our team will contact you to arrange an alternative.

Delivery method

All deliveries are made kerbside as standard. For health and safety reasons, drivers are unable to carry materials beyond the kerb. If you have specific access requirements, please contact us before placing your order.

Delivery exclusions

We currently do not deliver to the following postcode areas:

AB16, AB21–22, AB30–AB38, AB41–AB56, BT1–BT94, CA2, CA15, CA28, DD1, DD8, DD9, DG1, DG2, DG10–DG14, DG16, FK18–FK20, GY1–GY9, HS1–HS9, IM1–IM9, IV1–IV5, IV7, IV12–IV13, IV21–IV28, IV30–IV36, IV40–IV56, JE1–JE4, KA1, KA4–KA6, KA14–KA15, KA18–KA21, KA27–KA30, KW1–KW3, KW6–KW17, KY6–KY10, KY13–KY16, LL49, LL58–LL62, LL64–LL78, PA17–PA78, PH11, PH19–PH26, PH30–PH33, PH35–PH38, PH40–PH44, PH49–PH50, PO30–PO41, SA68, SA71, ZE1–ZE3

Important delivery terms

Shortages must be reported within 48 hours and noted on delivery paperwork
All deliveries must be signed for; redelivery charges may apply
Deferred deliveries may incur storage charges
Collected orders are not subject to delivery charges
Returns are subject to a 25% restocking fee (delivery charges excluded)
Made-to-measure items are non-refundable
Reasonable access to the delivery point must be available; additional charges may apply