Skip to the beginning of the images gallery

Expamet SPHS100150 Sph STD Joist Hanger 100x150mm (Box of 20)

SKU

exp_SPHS100150/20

£70.50 £58.75

Product Information

Expamet SPHS100150 joist hanger, 100mm (3.94") x 150mm (5.91"), supplied in boxes of 20.
Strong single-piece design with non-welded construction for reliable load support.
Galvanised coating (600g/m²) enhances corrosion resistance on site.
Designed for easy fixing with non-coaxial holes and compatibility with 3.75x30mm square twisted nails.
Installation requires joists cut square with max 6mm gap and masonry support for secure fitting.

Details

The Expamet SPHS100150 Joist Hanger is a specialist timber connector designed for builders, carpenters, and contractors who demand dependable joist support in structural framing. Supplied in practical boxes of 20, this hanger features a robust single-piece, non-welded construction with a protective galvanised coating for enhanced durability in site conditions. Please note installation guidelines are critical for optimal performance and safety.

Application

Ideal for securing timber joists in floor, ceiling, and decking frameworks, this joist hanger ensures precise alignment and load distribution. It is suited for use in studwork and structural timber connections where stability and long-term performance are essential. The product supports joists that require a level bearing surface, particularly where plasterboarding or other finishes will be applied.

Dimension

100mm (3.94") x 150mm (5.91")

Material

Galvanised steel with 600g/m² coating for corrosion resistance

Type

Timber connector – joist hanger

Important installation notes: The back of the hanger must be firmly fixed against the wall, with joists cut square and no more than 6mm gap to the hanger rear. Ensure a minimum of 675mm of set masonry is present above the support flange before applying loads. Joists should be nailed through the side gusset using 3.75x30mm square twisted nails. Additionally, the underside of joists should be notched to provide a level surface for plasterboarding.

More Information

More Information
Weight	15.280000
Availability	3 to 4 working days
Manufacturer	Expamet
MPN	SPHS100150
Material Gauge	2.0mm
Notified Body	Lucideon Ltd (NB 1289)
Length/Projection	75mm Shoe, 75mm Flange
Length/Height	100mm
Expamet - Product Range	Builders Metalwork
Plaster/Render/Joist Depth	150mm Joist Width
Expamet - Product Type	Masonry/Single Piece Hanger
Material	Galvanized Mild Steel DX51D+Z600 to EN10346:2015
European Standard	BS EN845-1:2013+A1:2016
Expamet - Product Sub Range	Joist Hangers
Test Standard	BS EN 846-8:2000
Coating/Finish/Colour	600g/m² Zinc Coating
Fire Rating	Euroclass A1
Declared Loadbearing Capacity	7.5kN SWL (SLS)
Sap Id	exp_SPHS100150/20

Customer Reviews

No reviews yet on this product

Delivery Information

Delivery availability

We deliver to most mainland UK addresses. Some postcode areas are excluded – please see the full list below.

Delivery charges

Delivery costs vary depending on your location, the products ordered, and the delivery method selected. All delivery charges are calculated clearly at checkout.

Fuel Surcharge

Information on our added Fuel Surcharge can be found at https://condell-ltd.com/fuel-surcharge-notification

Delivery dates

You can request a preferred delivery date at checkout. While we aim to meet this wherever possible, availability may depend on stock levels and third-party delivery schedules. If your chosen date is unavailable, a member of our team will contact you to arrange an alternative.

Delivery method

All deliveries are made kerbside as standard. For health and safety reasons, drivers are unable to carry materials beyond the kerb. If you have specific access requirements, please contact us before placing your order.

Delivery exclusions

We currently do not deliver to the following postcode areas:

AB16, AB21–22, AB30–AB38, AB41–AB56, BT1–BT94, CA2, CA15, CA28, DD1, DD8, DD9, DG1, DG2, DG10–DG14, DG16, FK18–FK20, GY1–GY9, HS1–HS9, IM1–IM9, IV1–IV5, IV7, IV12–IV13, IV21–IV28, IV30–IV36, IV40–IV56, JE1–JE4, KA1, KA4–KA6, KA14–KA15, KA18–KA21, KA27–KA30, KW1–KW3, KW6–KW17, KY6–KY10, KY13–KY16, LL49, LL58–LL62, LL64–LL78, PA17–PA78, PH11, PH19–PH26, PH30–PH33, PH35–PH38, PH40–PH44, PH49–PH50, PO30–PO41, SA68, SA71, ZE1–ZE3

Important delivery terms

Shortages must be reported within 48 hours and noted on delivery paperwork
All deliveries must be signed for; redelivery charges may apply
Deferred deliveries may incur storage charges
Collected orders are not subject to delivery charges
Returns are subject to a 25% restocking fee (delivery charges excluded)
Made-to-measure items are non-refundable
Reasonable access to the delivery point must be available; additional charges may apply