Skip to the beginning of the images gallery

Expamet LLS100 Long Leg Speedy Hanger 100mm (Box of 10)

SKU

exp_LLS100/10

£31.85 £26.54

Product Information

Expamet LLS100 Long Leg Speedy Hanger, 100mm (box of 10) for efficient joist support.
Constructed from high tensile, corrosion-resistant stainless steel for durability.
Designed to meet Type A requirements of Part E building regulations, ideal for party wall construction.
Safety end feature reduces risk of injury during installation.
Installation requires cavity size 50-75mm and compliance with PD6697 tie spacing; suitable for dwellings up to 10m high (max 3 storeys).

Details

The Expamet LLS100 Long Leg Speedy Hanger is a specialist stainless steel joist hanger designed for contractors working on cavity and party wall projects. Supplied in boxes of 10, these 100mm hangers deliver secure, corrosion-resistant fixing and simplify installation on residential builds up to three storeys or 10 metres in height. Please note, correct installation and embedment as per building regulations are essential for optimal performance.

Application

These hangers are ideal for supporting joists in cavity wall construction and party walls where compliance with Part E of the building regulations is required. They are commonly used in timber frame and masonry projects, providing reliable fixing points for floor or ceiling joists. The long leg design accommodates cavity sizes between 50 and 75mm, making them suitable for a range of insulation thicknesses and wall configurations. Installers must ensure ties are fully embedded and covered with fresh mortar before laying the next course, following PD6697 guidelines for tie spacing.

Dimension

Length: 100mm (approximately 4 inches)
Designed for cavity sizes from 50mm to 75mm
Minimum design embedment: 62.5mm

Material

High tensile stainless steel with corrosion-resistant finish

Type

Joist hanger – Speedy hanger variant

For installations requiring partial fill rigid insulation, a retaining disc (reference SSCD) is recommended. Accessories shown in illustrations are not included. Always ensure compliance with relevant building regulations and installation standards when using these hangers.

More Information

More Information
Weight	5.050000
Availability	3 to 4 working days
Manufacturer	Expamet
MPN	LLS100
Material Gauge	1.5mm
Notified Body	Exova BM Trada (NB 1224)
Width/Wing Length	100mm Joist Width
Length/Projection	50mm Shoe
Length/Height	365mm
Expamet - Product Range	Builders Metalwork
Plaster/Render/Joist Depth	Max joist height 225mm
Expamet - Product Type	Wrap Over (adj) joist hanger
Material	Galvanized Mild Steel DX51D+Z275 to EN10346:2015
European Standard	ETAG015 (ETA13/0803)
Expamet - Product Sub Range	Joist Hangers
Test Standard	ETAG015/TR016
Coating/Finish/Colour	275g/m² Zinc Coating
Fire Rating	Euroclass A1
Declared Loadbearing Capacity	9.6kN (ULS) 6.7kN (Underslung)
Sap Id	exp_LLS100/10

Customer Reviews

No reviews yet on this product

Delivery Information

Delivery availability

We deliver to most mainland UK addresses. Some postcode areas are excluded – please see the full list below.

Delivery charges

Delivery costs vary depending on your location, the products ordered, and the delivery method selected. All delivery charges are calculated clearly at checkout.

Fuel Surcharge

Information on our added Fuel Surcharge can be found at https://condell-ltd.com/fuel-surcharge-notification

Delivery dates

You can request a preferred delivery date at checkout. While we aim to meet this wherever possible, availability may depend on stock levels and third-party delivery schedules. If your chosen date is unavailable, a member of our team will contact you to arrange an alternative.

Delivery method

All deliveries are made kerbside as standard. For health and safety reasons, drivers are unable to carry materials beyond the kerb. If you have specific access requirements, please contact us before placing your order.

Delivery exclusions

We currently do not deliver to the following postcode areas:

AB16, AB21–22, AB30–AB38, AB41–AB56, BT1–BT94, CA2, CA15, CA28, DD1, DD8, DD9, DG1, DG2, DG10–DG14, DG16, FK18–FK20, GY1–GY9, HS1–HS9, IM1–IM9, IV1–IV5, IV7, IV12–IV13, IV21–IV28, IV30–IV36, IV40–IV56, JE1–JE4, KA1, KA4–KA6, KA14–KA15, KA18–KA21, KA27–KA30, KW1–KW3, KW6–KW17, KY6–KY10, KY13–KY16, LL49, LL58–LL62, LL64–LL78, PA17–PA78, PH11, PH19–PH26, PH30–PH33, PH35–PH38, PH40–PH44, PH49–PH50, PO30–PO41, SA68, SA71, ZE1–ZE3

Important delivery terms

Shortages must be reported within 48 hours and noted on delivery paperwork
All deliveries must be signed for; redelivery charges may apply
Deferred deliveries may incur storage charges
Collected orders are not subject to delivery charges
Returns are subject to a 25% restocking fee (delivery charges excluded)
Made-to-measure items are non-refundable
Reasonable access to the delivery point must be available; additional charges may apply