Expamet 267/600 Riblath Stainless Steel 0.300mm 2500x600mm

Discover the reliability of our Riblath Stainless Steel. These sheets measure 2500x600mm and have a thickness of 0.300mm, making them suitable for construction and reinforcement purposes. The stainless steel construction ensures exceptional corrosion resistance and strength.

Installation Requirements:

  • Ribs must point towards structure
  • Movement joints must be provided every 5m, horizontally and vertically for cement based render
  • Do not use with Gypsum based plasters
  • Overlap sheets 50mm along short edge, and edge ribs nestled. Fixings to perimeter at 150mm intervals through ribs, central fixings at max 600mm every 2nd rib
  • If overlaps are unsupported, they must be wire-tied at 150mm centres. Sheets should be a rranged in a staggered (brick bond) pattern

Features & Benefits:

  • Strengthening ribs hold mesh off substrate (self furring)
  • Stainless steel for external use
  • Can be moulded into curves/domes
  • Can easily be cut to size using tin-snips or aviation cutters